|
|
Table Saw FET
|
 |
|
|
SKU: 37070
For perfect straight cuts in wood, non-ferrous metals, plastics. Ideal for model building, picture framing, dollhouses, birdhouses and other intricate projects. More details...Price: $427.50 List Price: $475.00 You Save: $47.50 (10%) Availability: Typically ships within 3 days
|
|
|
|
Table Saw FET
|
|
|
Product Details
|
|
|
The ideal machine for straight, miter and compound cuts. For cutting wood, non-ferrous metals, plastics, Plexiglas, glass fibre reinforced sheets, foam and many other materials. The optimal compact size machine for model builders, toy makers, architects, cabinetmakers. Even the smallest items may be cut cleanly, eliminating subsequent finishing. The right machine for high-quality results and precision cuts. A table indicates the recommended speeds for various materials. Features -
Stable construction because load bearing parts and plane-milled table are made of die-cast aluminium. -
NEW The micro-adjustable, precise and stable longitudinal stop provides decisive advantages: Corrections even smaller than 0.004" (1/10mm) can be made after coarse adjustment using an adjusting screw. The height is adjustable and 45° tiltable saw blade makes it possible to cut double mitres when used together with the angle stop -
Machined and perfectly plane aluminum work table allows sliding the work piece easily. The table has two mitre guide slots. -
Sturdy ABS plastic housing. -
Extendable table extension with integrated auxiliary stop. Extension table is housed integrally and pulled out to create an even more effective table width up to 19-5/8"
(500mm) and to handle longer workpieces. -
The drive unit has special, quiet DC motor and an Optibelt toothed belt, producing a high torque. -
NEW Non-slotted sawing cap cover of ABS for tight tolerances between saw blade and table (is slotted from below by the FET saw blade). For cutting very small parts -
NEW Table and drive can be lifted up and supported like an engine hood. For cleaning the device and easy saw blade replacement. -
NEW Angle stop with stop rail of aluminium and adjustable limit stop for manufacturing parts of equal length and the same angle. -
On/Off switch. -
The blade arbor has ball bearings. -
Tilting arbor for angle cuts up to 45°. - Graduated mitre guide (0-90º) for angle cuts.
- Cuts wood up to 1" at 90º and 3/4" at 45º
-
Practical tool storage compartment. -
Includes: 28732 Tungsten carbide tip saw blade, size
Ø 3-9/64" (80mm) x 1/16" (1.6mm), bore 13/32" (10mm), 36 teeth. Cutting depth 0.04 - 5/6" (1-22mm)
-
- Two year warranty
| Technical Data | | Maximum power | 200 watts, 1.6amps (??hp) | | Speed | 7,000 rpm | | Worktable Size | 12" x 12" (300 x 300mm) | | Cutting Capacity: Wood at 90º Wood at 45º Plastic | 1" (25mm) 1/2" (12.5mm) 1/2" (12.5mm) | | Blade Height - Adjustable | 1/32" to 1" | | Max. Rip cut with fence | 4.-1/4" | | Tilting Arbor | 0-45º | | Overall Size
(without extension wing) | 12" x 10" x 7"
(300 x 262 x 170mm) | | Voltage | 110-120V AC, 60 Hz | | Weight | 12 lbs (?kg) |
| | Service Info | | | | | | | | In The Box | | • Table Saw FET • Miter Guide w/stop rail • Precise Rip Fence • TCT Saw Blade 36TPI • Hex Key • Instructions | | | | Blade Sizes | | The machine may be used with all blades providing Ø 2" to 3 11/32" (50 - 85 mm) with 13/32" (10 mm) bore | | | | Note: For cutting non-ferrous metal or steel, we recommend using the 37172 Micro Bandsaw MBS/E. |
| |
|
|
|
|
|
|
May we also suggest...
|
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. ( ) indicates a required accessory.
|
|
|
|
|
Table Saw FET